You are here
Permanent Distribution Equipment
Permanent Distribution Equipment
Blakley Electrics designs and manufactures a wide range of Low Voltage (230V and 400V) and Reduced Low Voltage (110V) distribution equipment for permanent installations. Market sectors include Rail, Nuclear, Education and the Military.
IP55 MCB Distribution Boards
A range of heavy duty MCB distribution boards manufactured in accordance with BS EN 61439-3, single and three-phase, 4 way to 24 way, with or without additional DIN rail for control devices. Distribution boards incorporate Schneider switchgear and Acti 9 pan assemblies.
IP55 MCB Distribution Boards, 110V
A range of heavy duty, MCB distribution boards equipped with double-pole MCBs or RCBOs, designed for 110V Reduced Low Voltage Supplies.
View ProductsIP55 MCB Distribution Boards, 110V
IP66 MCB Distribution Board
A range of heavy duty MCB distribution boards manufactured in accordance with BS EN 61439-3, single and three-phase, 4 way to 18 way, with or without additional DIN rail for control devices. Distribution boards incorporate Schneider switchgear and Acti 9 pan assemblies.
IP55 MCB Distribution Boards, LUL Approved
MCB Distribution Boards with incomers rated up to 250A, type tested to IP55. The range has been approved by London Underground for installation on their premises, including defined areas within Section 12 locations. MCB boards can be configured for 400V TP&N, 230V SP&N or 110V double-pole operation. Approved Product Register (APR) No. 1932 refers.
Power Cluster Assemblies enable sockets of different current ratings and voltages to be fed from a single supply. Power Clusters are factory built assemblies and are supplied complete with all switchgear, sockets, transformers, etc., as required. Standard enclosures are manufactured from mild steel and a range of pre-treatments and paint finishes can be offered. Power Cluster enclosures can also be fabricated from stainless steel, when assemblies are to be used in corrosive atmospheres.
Ground Mounted Assemblies
Ground Mounted Assemblies are designed to provide power in outdoor markets, car parks, precincts, airfields and aircraft hangars. Comprising of standard duty and heavy duty enclosures, fitted with a range of lid arrangements and socket outlet options. Non-standard assemblies can be made to order.
Automatic Transfer Assemblies, 60A to 400A
Standard Automatic Transfer switch assemblies are available in ratings from 60A to 400A, three-phase and neutral. Changeover is via electrically and mechanically interlocked contactors and control is via a Deep Sea controller, details of which are available upon request.
View ProductsAutomatic Transfer Assemblies, 60A to 400A
Outdoor pillar enclosures with roots, which can be supplied fully equipped with a range of switchgear and controlgear or supplied empty for equipping on site. Pillar enclosures are generally made from mild steel and a range of finishes is offered. Feeder pillars can also be made from various grades of stainless steel or fibreglass (GRP).
Socket Outlet Assemblies, 16A or 32A, surface or flush mounting, 110V or 230V, single or twin, with models approved by London Underground Limited (LUL) and BNFL
Distribution Products for the Nuclear Sector
A range of temporary and permanent distribution assemblies developed for the Nuclear sector (formerly BNFL). Products include Site Distribution assemblies, Red Spot fuse boards and Socket-outlet assemblies.
Power Clusters for Hangars
Hangar Distribution Assemblies incorporating PEMS protected outlets as well as 28V DC and 200V 400Hz supplies.
View ProductsPower Clusters for Hangars
Custom Range of DSUs
Dockside Service Units are high IP rating, high current distribution assemblies designed for installation on docksides without additional protection.