You are here
Power Cluster Assemblies enable sockets of different current ratings and voltages to be fed from a single supply. Power Clusters are factory built assemblies and are supplied complete with all switchgear, sockets, transformers, etc., as required. Standard enclosures are manufactured from mild steel and a range of pre-treatments and paint finishes can be offered. Power Cluster enclosures can also be fabricated from stainless steel, when assemblies are to be used in corrosive atmospheres.
Power Clusters 230V / 400V
Power Clusters receive a single incoming supply cable and incorporate either an incoming switch or an incoming RCCB rated up to 100A. Power Clusters are fitted with 230V or 400V sockets to BS EN 60309-2, which are rated at 16A, 32A and 63A with MCB and RCD protection, as required.
Complementary product categories
SP series Multi Voltage Assemblies
Single Point Distribution Assemblies are factory built assemblies supplied complete with different combinations of switchgear, transformers and socket outlets rated at 230V, 110V and 24V. The standard range of SP assemblies is available with ingress protection of IP20, IP44 or IP55.
Protected Sockets, 230V & 400V
Mains Voltage Industrial Socket Outlet Assemblies to BS EN 60309-2, rated from 16A to 125A, single or three-phase. Sockets can incorporate RCD and Monitored Earth protection, with or without MCB protection. Dependent on the overall configuration, assemblies can incorporate mechanical or electrical interlock, to prevent insertion or withdrawal of plugs on load. Standard assemblies are housed in all-insulated enclosures and non-standard assemblies can be housed in mild steel or stainless steel enclosures with a range of paint finishes.