Distribution Products for the Nuclear Sector

6W Fuse Board, 1 x 100A Fusebank

Type Ref: FB/1N/100/6W/SSES

230v icon 100A icon 6 way assembly icon IP54 icon

P.O.A

Can’t find what you’re looking for?

We’re always here to help! Give us a call or fill out our contact form and a member of our team will be in touch!

Heavy duty IP54 fuse board, single-phase and neutral, fitted with 1 no. 100A, 6 way, BS88, Red Spot fuse bank. Fuses are supplied separately.

Blakley Electrics FB series of single-phase and neutral fuse boards meet Sellafield Limited requirements. The boards are intended for heavy duty, industrial installations and are equipped with Cooper Bussmann (formerly GEC) Red Spot fusebanks rated at 100A.

Enclosure
Enclosures are wall mounting, incorporate external mounting brackets and provide protection to IP54. They are of robust construction, fabricated from 1.5mm sheet steel and are seam welded. Undrilled top and bottom gland plates are provided. Doors are side hinged and fitted with quarter-turn fasteners, a key lock, facility for a padlock and a welded steel A4 document pocket. Both door and gland plates are cross bonded to the main M10 enclosure earth point utilising 4.0mm² G/Y PVC cable. No inset plate is provided (in accordance with Sellafield Limited requirements). Enclosures are at least as large as their GEC equivalents, thus avoiding temperature rise and cable access problems.

The enclosures are protected against corrosion by a high quality, outdoor finishing system comprising of a zinc phosphate pre-treatment followed by polyester powder coating. The colour is Dark Admiralty Grey (BS 4800 18B25).

Circuitry
Designed for 230V SP&N operation, the board is fitted with 1 no. 6 way, 100A Red Spot fusebank. Incoming and outgoing cables terminate directly onto the fusebank and associated neutral / earth bars (see below). Fuses are ordered separately.

Neutral / Earth provision
Neutral and earth bars are provided towards the bottom of each board; they are fully rated, made from HDHC copper and unshrouded (in accordance with Sellafield Limited requirements). Each bar has an incoming M10 stud connection and a separate M10 connection point for each fuse carrier. An M10 external earth stud is provided, bonded back to the earth bar. Each bar is marked with appropriate labelling detailing circuit designations.

Non-Sellafield Installations
For non-Sellafield installations, please contact us if you require: (i) inset plates to be fitted, which provide extra shielding to the fuse bank terminals when the door is open and / or (ii) shrouding of neutral and earth bars in accordance with BS EN 61439-3.

Product Downloads

Data Sheets

Drawings

On Application

This product cannot currently be purchased online. Please contact Blakley Electrics Customer Services on 0333 188 0284 to discuss your requirements and for pricing and lead times.