SP Assembly, IP20, 2 x 16A 110V sockets, 2 kVA transformer
Standard Industrial Transformers
Single Point Distribution Assembly, IP20
Type Ref: SPDA20-1/LI-LO/P10/1N/C1/TX2/S2/IP20
P.O.A
Can’t find what you’re looking for?
We’re always here to help! Give us a call or fill out our contact form and a member of our team will be in touch!
Purpose built, Single Point Distribution assembly, equipped with switchgear and transformer to provide a 110 volt supply via an arrangement of socket-outlets, all as detailed below.
Enclosure
In standard configuration the enclosure is wall mounting and of sheet steel construction. The enclosure is finished by a system comprising of a zinc phosphate pre-treatment followed by a top coat of electro-statically applied, polyester powder paint, standard shade Dark Admiralty Grey. The wall mounting brackets are removable and can be repositioned to enable the enclosure to be floor mounted.
Incoming Terminals
Suitable to loop-in and out 2 x 6mm2 conductors. The terminals are shrouded to IP2X. The over current protection at source should not exceed 32A.
Primary MCB
1 no. 10A SP Type D MCB
Transformer
2 kVA, 230:110V double-wound transformer to BS EN 61558, parts 1 and 4 but with an earthed secondary winding. The primary winding has tappings at 220, 240 and 250 volts.
Distribution 110 volt
The output of the secondary winding is 110 volts CTE and provides a Reduced Low Voltage (RLV) supply in accordance with BS 7671. The winding feeds:
1 no. 16A DP Type C MCB feeding 2 no. 16A, 110V, 3P, BS EN 60309-2, IPX4 sockets.
Product Downloads
Data Sheets
Drawings
On Application
This product cannot currently be purchased online. Please contact Blakley Electrics Customer Services on 0333 188 0284 to discuss your requirements and for pricing and lead times.