What are you looking for?

110V luminaires to minimise running costs and CO2 emissions even when supplied from standard site transformers via 3C cable

Blakley Electrics manufactures i-Site, a 110V site lighting system, which minimises running costs and CO2 emissions by monitoring movement in the immediate vicinity of each luminaire.

The microwave motion sensor can be set between 5 seconds and 30 minutes. If there is no movement during the set period (the hold time) the light reduces to the dimmed level, which can be set at 10%, 20%, 30% or 50% of the normal output and is extinguished after a further defined period. If a level of light is always required, the stand-by period (when the lights are dimmed) can be permanent, whether there is movement or not. The light output is restored to full output as soon as movement is detected. i-Site luminaires also incorporate a light level sensor.

It is simple to install and can be fed from a standard 110V site transformer via Flori-67/3P (Blakley Electrics plug-in wiring system) or it can be hard wired using standard 3 core cable.

 

Blakley Electrics i-Site Intelligent Lighting System

Explore i-Site Intelligent Site Lighting Products

Anti-corrosive 110V LED fittings with i-Site movement and light level detection, loose fittings or pre-wired with tee box. The i-Site 110V site lighting system minimises running costs and CO2 emissions by monitoring movement and the light level in the immediate vicinity of each luminaire.

View products

Anti-corrosive 110V LED fittings with i-Site movement and light level detection, pre-wired with a Flori-67/3P adaptor. The i-Site 110V site lighting system minimises running costs and CO2 emissions by monitoring movement and the light level in the immediate vicinity of each luminaire.

View products

Contact us

Are you ready to discover your high performance power and lighting solutions?

Go to Top